Another scenario involving the default username and password for UniFI Access Points (and many other Ubiquiti products) would be when accessing the unit via SSH – in this case (and if you haven’t already adopted the AP into the controller software as mentioned above), you would then need to use the default username and password – this has always been Username: ubnt and Password: ubnt.
Tout d'abord, vous devez toujours éviter les mots de passe communs comme qwerty, 12345, password, abc123, 11111, 987654321, 7777777, 555555, 123123, 1234567890, 123456789, qwertyuiop et autres semblables. The WatchGuard Access Point web UI login page appears.The WatchGuard Access Point Web UI appears, with the Access Point Status page selected.The WatchGuard Access Point web UI login page appears.The WatchGuard Access Point Web UI appears, with the Access Point Status page selected.The firmware image file path appears in the Firmware Location text box.
to the AP by the gateway wireless controller.Your best bet is to reset the AP device at this point - Went down that road Jackie. From the Access Point web UI, you can:Because you manage the configuration, passphrases, and firmware updates for your paired WatchGuard AP from the Gateway Wireless Controller on the Firebox, it is not often necessary to use the WatchGuard Access Point web UI to directly manage the configuration of your AP. The default passphrase is wgwap. That should solve the problem with lost passwords, because any admin can unlock an account and reset a forgotten password. To view the AP system log messages, from the left navigation menu, select If you have made changes to the AP configuration that have not yet been implemented, you can choose to save your changes and apply them to the AP, or revert the changes so they are not applied to the AP. You can then connect to the AP to manage the AP settings. This topic has been locked by an administrator and is no longer open for commenting.
You must create an SSL VPN user account on the Firebox and download a mobile VPN profile from the Firebox.To allow a remotely deployed AP to be managed by a Gateway Wireless Controller over a VPN:When you manage your WatchGuard AP with the Gateway Access Controller on your Firebox, by default, the firmware on your AP is automatically updated when a new version is available to the controller on the Firebox. For more details about AP failsafe mode and recovery, see the WatchGuard Knowledge Base.To help you troubleshoot issues with the AP, you can review the system log messages on the AP. Interruption of power during a firmware upgrade can cause the AP to start in failsafe mode. Possibly some misunderstanding?For the username of config, the default password should also In this process they will enter new status and admin passwords, solving the problem they have in 5-10 minutes. The old WG standbys are not working - UN "support" - what is the PW???? Product: Version: Port / Protocol: Username: Default Password: Impact: Notes: firebox 1000 : Multi: admin (none) Admin : FireBox (blank) wg : … However, it is more likely to be the passphrase last likely assigned to the AP by the gateway wireless controller. We have been deploying a bunch of WG AP's...but, some recent changes have us thinking it is not the best option. For more information, see Before you begin, make sure you have the IP address of the AP.To connect to the WatchGuard Access Point web UI for an AP that is connected to your Firebox:You can now monitor and manage the settings for your AP, as described in the next sections.By default, your AP uses DHCP to automatically get an IP address from your network. Before you can upgrade your AP to a new version of firmware, you must have saved the firmware image to the computer connected to your AP. The WatchGuard Access Point web UI is not available for AP120, AP320, AP322, and AP420 devices.Before you can connect your computer directly to the WatchGuard AP for the first time, you must change the network settings on your computer to enable your computer to get access to the AP. When you configure your AP, you can continue to use DHCP to automatically configure the network settings, or you can use a static IP address and manually configure the network settings. The WatchGuard Access Point Web UI appears, with the Access Point Status page selected. For the future, it would be best to add at least one secondary admin account - possibly with AD authentication. To help you easily identify the AP, you can also specify a friendly device name for the AP.You can deploy your APs in remote locations and manage these APs over an SSL VPN with the Gateway Wireless Controller. To see basic information about AP100, AP102, AP200, and AP300 devices, and manage some of the settings for the APs, you can connect directly to the WatchGuard Access Point web UI. This 802.11ac Wave 2 access point comes equipped with Multi-User MIMO (MU-MIMO) connecting multiple devices at the same time – enhancing your secure Wi-Fi experience.
This pwd is pretty long around - strange, that support did not have it 'at hand'. The AP125 from WatchGuard is the smallest access point in our portfolio. You can also choose to manually upgrade the firmware on your AP from the Access Point web UI, if a firmware update for the AP is available on the WatchGuard Software Downloads page. To continue this discussion, please When the AP is in failsafe mode, the Access Point web UI provides a single option that enables you to upgrade the AP firmware. This person is a verified professional.
Open Sez Me! For the username of config, the default password should also be config. You can now monitor and manage the settings for your AP, as described in the next sections. Poor planning.
The WatchGuard Access Point web UI login page appears. Support can … Download and install the Remote Access Program. Click Login. Support had to move it to level 2 and see if someone can figure it out.